Show simple item record

dc.contributor.authorX. Q. Shi
dc.contributor.authorH. L. J. Pang
dc.contributor.authorZ. P. Wang
dc.contributor.authorQ. J. Yang
dc.date.accessioned2017-05-09T00:10:26Z
dc.date.available2017-05-09T00:10:26Z
dc.date.copyrightJanuary, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27042#81_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128524
dc.description.abstractIn this study, a large number of creep tests were carried out using miniature specimens in order to investigate the creep behavior of 63Sn/37Pb eutectic solder alloy over a wide temperature range from −40 to 150°C and stress range from 0.75 to 70 MPa. Based on dislocation and diffusion theories, two unified constitutive models were developed to describe the dislocation-controlled and diffusion-controlled creep behaviors observed. It was found that the two models accurately predict the experimental data. A deformation mechanism map was established for this eutectic solder alloy in order to interpret the creep mechanism under different temperature and loading conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCreep Behavior and Deformation Mechanism Map of Sn-Pb Eutectic Solder Alloy
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1525254
dc.journal.fristpage81
dc.journal.lastpage88
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsSolders
dc.keywordsStress
dc.keywordsMechanisms
dc.keywordsAlloys
dc.keywordsDeformation AND Dislocations
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record