Show simple item record

dc.contributor.authorFuh-Kuo Chen
dc.contributor.authorYi-Che Lee
dc.date.accessioned2017-05-09T00:10:25Z
dc.date.available2017-05-09T00:10:25Z
dc.date.copyrightJanuary, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27042#75_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128522
dc.description.abstractFor a perforated sheet with circular holes, used in shadow masks, the diameter of the circular hole varies through the thickness, and the non-uniform circular holes are arranged in a triangular pattern. In order to simplify the analysis, a perforated sheet with equivalent circular holes of uniform diameter is proposed such that its plastic behavior is similar to that with the given non-uniform circular holes. In this study, a yield criterion is discussed for the perforated sheet with uniform circular holes by employing an equivalent continuum approach, which is then applied to examine the plastic deformation of the perforated sheet with non-uniform circular holes. The analytical results predicted by the theory, including those for the apparent yield stresses and strain ratios, are verified by the results obtained from the finite element analysis and also from experiments.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePlastic Deformation of a Perforated Sheet With Non-Uniform Circular Holes Along the Thickness Direction
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1526127
dc.journal.fristpage75
dc.journal.lastpage80
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsStress
dc.keywordsFinite element analysis
dc.keywordsThickness
dc.keywordsYield stress
dc.keywordsMasks AND Shades and shadows
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record