Show simple item record

dc.contributor.authorR. Kubler
dc.contributor.authorM. Berveiller
dc.contributor.authorM. Cherkaoui
dc.contributor.authorK. Inal
dc.date.accessioned2017-05-09T00:10:24Z
dc.date.available2017-05-09T00:10:24Z
dc.date.copyrightJanuary, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27042#12_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128513
dc.description.abstractDuring the martensitic transformation in elastic-plastic materials, the local transformation strain as well as the plastic flow inside austenite are strongly related with the crystallographic orientation of the austenitic lattice. Two mechanisms involved in these materials, i.e., plasticity by dislocation motion and martensitic phase formation are coupled through kinematical constraints so that the lattice spin of the austenitic grains is different from the one due to classical slip. In this work, the lattice spin ω̇eA of the austenitic grains is related with the slip rate on the slip systems of the two phases, γ̇A and γ̇M, the evolution of the martensite volume fraction ḟ and the overall rotation rate Ω̇ of the grains. This new relation is integrated in a micromechanical model developed for unstable austenite in order to predict the evolution of the austenite texture during TRansformation Induced Plasticity (TRIP). Results for the evolution of the lattice orientation during martensitic transformation are compared with experimental data obtained by X-ray diffraction on a 304 AISI steel.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTransformation Textures in Unstable Austenitic Steel
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1525249
dc.journal.fristpage12
dc.journal.lastpage17
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsMartensitic transformations
dc.keywordsTexture (Materials)
dc.keywordsDeformation
dc.keywordsParticle spin AND Mechanisms
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record