Show simple item record

dc.contributor.authorXin Long
dc.contributor.authorSanjeev K. Khanna
dc.date.accessioned2017-05-09T00:10:24Z
dc.date.available2017-05-09T00:10:24Z
dc.date.copyrightApril, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27045#222_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128507
dc.description.abstractAn incremental and thermal-electro-mechanical coupled finite element model has been presented in this study for predicting residual stress distribution in a spot welded steel joint. Approximate temperature dependent material properties, including physical and mechanical properties, have been considered. The spot nugget shape and the residual stress distribution were obtained by simulation. The results obtained have been compared with experimental measurements, and good agreement is observed. The highest tensile residual stress occurs at the center of the nugget and the residual stress decreases towards the edge of the nugget.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Simulation of Residual Stresses in a Spot Welded Joint
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1543968
dc.journal.fristpage222
dc.journal.lastpage226
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsWelding
dc.keywordsComputer simulation
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsStress concentration
dc.keywordsWelded joints
dc.keywordsElectrodes
dc.keywordsTemperature
dc.keywordsCycles
dc.keywordsCooling
dc.keywordsMechanical properties
dc.keywordsFinite element model
dc.keywordsShapes
dc.keywordsMaterials properties AND Simulation
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record