Show simple item record

dc.contributor.authorY. C. Zhou
dc.contributor.authorT. Hashida
dc.contributor.authorC. Y. Jian
dc.date.accessioned2017-05-09T00:10:23Z
dc.date.available2017-05-09T00:10:23Z
dc.date.copyrightApril, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27045#176_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128499
dc.description.abstractThe theoretical model for the blister test method was used to analyze the interface fracture toughness of zirconia coating deposited on an SUS304 stainless steel substrate by a plasma-spraying method. The elastic parameters of the debonded coating were determined by testing the oil pressure q and maximum deflection w(0). SEM observation, compliance method and ultrasonic detection were used to determine the radius of the debonded coating. The three methods gave the same results for the debonded coating radius. Micro-observations showed that the interfacial crack propagates by the growth of voids or microcracks ahead of the main crack and coalescence with the main crack. The energy release rate G0 with phase angle ψ=0 for type A coating and type B coating was, respectively, 14.54∼25.88 J/m2 and 11.88∼16.21 J/m2. The corresponding interface fracture toughness for type A TBC coating and for type B TBC coating is, respectively, 0.77∼1.02 MPa⋅m1/2 and 0.52∼0.61 MPa⋅m1/2. The stable phase angle was approximately −31.5° and −30.2° for coating A and coating B, respectively.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDetermination of Interface Fracture Toughness in Thermal Barrier Coating System by Blister Tests
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1555658
dc.journal.fristpage176
dc.journal.lastpage182
dc.identifier.eissn1528-8889
dc.keywordsCoating processes
dc.keywordsCoatings
dc.keywordsFracture toughness
dc.keywordsPressure
dc.keywordsDeflection
dc.keywordsThermal barrier coatings
dc.keywordsFracture (Materials)
dc.keywordsPlasma spraying
dc.keywordsStress
dc.keywordsStainless steel AND Testing
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record