Show simple item record

dc.contributor.authorRobert Wetherhold
dc.contributor.authorMarkus Messer
dc.contributor.authorAbani Patra
dc.date.accessioned2017-05-09T00:10:22Z
dc.date.available2017-05-09T00:10:22Z
dc.date.copyrightApril, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27045#148_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128495
dc.description.abstractA directionally attached piezoelectric (DAP) actuator is one method to control the twisting vibration of a plate with high authority. Although insuring proper performance for DAP actuators has been discussed in terms of the control law used, the optimization of the mechanical details of the actuator itself has received little attention. There is an interaction between the actuator and the controlled structure because more actuator material on the structure adds actuation power but also stiffens the structure. The effects of DAP actuator geometric parameters and material properties are explored in a systematic way for the case of a cantilever beam and it is shown that significant improvements in performance are possible. The material property study indicates that an optimum point exists whereby the weight and thus cost can be lowered while improving structure response by using a composite actuator. The actuator thickness, width, orientation angle, and offset from the clamped end have significant effects on structure response. In order of importance, the geometric parameters are: actuator thickness, orientation angle, width and offset. A study of the modal distribution for the structure shows that if the input disturbance that is to be suppressed is modally well characterized, the structure can be efficiently controlled by using more than one independent actuation voltage.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimization of Directionally Attached Piezoelectric Actuators
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1555653
dc.journal.fristpage148
dc.journal.lastpage152
dc.identifier.eissn1528-8889
dc.keywordsElectric potential
dc.keywordsComposite materials
dc.keywordsMaterials properties
dc.keywordsActuators
dc.keywordsOptimization
dc.keywordsThickness
dc.keywordsPiezoelectric actuators AND Vibration
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record