Show simple item record

dc.contributor.authorO. Jin
dc.contributor.authorS. Mall
dc.contributor.authorH. Lee
dc.date.accessioned2017-05-09T00:10:21Z
dc.date.available2017-05-09T00:10:21Z
dc.date.copyrightJuly, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27049#315_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128484
dc.description.abstractThe effects of variable amplitude loading on fretting fatigue behavior of titanium alloy, Ti-6Al-4V were examined. Fretting fatigue tests were carried out under constant stress amplitude and three different two-level block loading conditions: high-low (Hi-Lo), low-high (Lo-Hi), and repeated block of high and low stress amplitudes. The damage fractions and fretting fatigue lives were estimated by linear and non-linear cumulative damage rules. Damage curve analysis (DCA) and double linear damage rule (DLDR) were capable to account for the loading order effects in Hi-Lo and Lo-Hi loadings. In addition, the predictions by DCA and DLDR were better than that by linear damage rule (LDR). Besides its simplicity of implementation, LDR was also capable of estimating failure lives reasonably well. Repeated two-level block loading resulted in shorter lives and lower fretting fatigue limit compared to those under constant amplitude loading. The degree of reduction in fretting fatigue lives and fatigue strength depended on the ratio of cycles at lower stress amplitude to that at higher stress amplitude. Fracture surface of specimens subjected to Hi-Lo and repeated block loading showed the clear evidence of change in stress amplitude of applied load. Especially, the repeated two-level block loading resulted in characteristic markers which reflected change in crack growth rates corresponding to different stress amplitudes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInvestigation Into Cumulative Damage Rules to Predict Fretting Fatigue Life of Ti-6Al-4V Under Two-Level Block Loading Condition1
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1590998
dc.journal.fristpage315
dc.journal.lastpage323
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsStress
dc.keywordsCycles
dc.keywordsFailure
dc.keywordsFatigue life AND Fatigue testing
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record