Show simple item record

dc.contributor.authorL. Bruno
dc.contributor.authorF. M. Furgiuele
dc.contributor.authorG. Sciumé
dc.date.accessioned2017-05-09T00:10:21Z
dc.date.available2017-05-09T00:10:21Z
dc.date.copyrightJuly, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27049#309_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128483
dc.description.abstractA FEM analysis was carried out to study the mechanical behavior of a hard coating subjected to a nanoindentation test performed with a Berkovich indenter. The nanoindentation test was simulated by FEM code MSC Marc. The case study is a coating of CVD (Chemical Vapor Deposition) diamond. By the simulation it is possible to obtain the load-displacement curve by which Young modulus and hardness may be evaluated. The paper also analyzes the residual stresses developed at the end of the unloading phase and the influence of the strengthening law to determine the hardness and the elastic modulus of the CVD diamond. The analysis has demonstrated, by the comparison with the experimental results, that the numerical model well describes the behavior of the coating of CVD diamond in the nanoindentation test; in addition it was pointed out that the choice of the hardening law is a crucial aspect in the simulation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMechanical Characterization of a CVD Diamond Coating by Nanoindentation Test
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1586937
dc.journal.fristpage309
dc.journal.lastpage314
dc.identifier.eissn1528-8889
dc.keywordsCoatings
dc.keywordsDiamond films
dc.keywordsChemical vapor deposition
dc.keywordsStress
dc.keywordsFinite element methods
dc.keywordsDiamonds
dc.keywordsElastic moduli
dc.keywordsFinite element model
dc.keywordsNanoindentation
dc.keywordsCoating processes
dc.keywordsDisplacement
dc.keywordsSimulation
dc.keywordsComputer simulation AND Residual stresses
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record