Show simple item record

dc.contributor.authorY. Park
dc.contributor.authorGraduate Research Assistant
dc.contributor.authorJ. S. Colton
dc.date.accessioned2017-05-09T00:10:20Z
dc.date.available2017-05-09T00:10:20Z
dc.date.copyrightJuly, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27049#247_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128474
dc.description.abstractTo meet the growing demand for rapid, low-cost die fabrication technology in the sheet metal forming industry, easy-to-machine, polyurethane-based, composite board stock is widely used as a rapid tooling material. However, the failure mechanisms of the rapid prototyped tools are not clearly understood, thus making the prediction of tool life difficult. As a fundamental step for effective tool life estimation, the microstructure and the mechanical properties of the polymer composite tooling material were characterized. A finite element model of 90° V-die bending process was developed, and the effects of process parameters on stress distribution in punch and die were investigated through simulation. The simulation results were verified through experiments using instrumented, laboratory-scale punch and die sets.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSheet Metal Forming Using Polymer Composite Rapid Prototype Tooling
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1543971
dc.journal.fristpage247
dc.journal.lastpage255
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsPolymer composites
dc.keywordsSheet metal work
dc.keywordsTooling
dc.keywordsTravel
dc.keywordsForce
dc.keywordsEngineering prototypes
dc.keywordsCycles
dc.keywordsFinite element model
dc.keywordsUrethane elastomers
dc.keywordsFatigue AND Shapes
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record