Show simple item record

dc.contributor.authorLimin Luo
dc.contributor.authorAmit K. Ghosh
dc.date.accessioned2017-05-09T00:10:20Z
dc.date.available2017-05-09T00:10:20Z
dc.date.copyrightJuly, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27049#237_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128473
dc.description.abstractStrain recovery after plastic prestrain and associated elastic and inelastic behavior during loading and unloading of DQSK steel sheet are measured. Average tangent modulus and Poisson’s ratio during unloading and reloading are found to differ from their elastic values in the undeformed state, and they also vary as a function of stress. This modulus, often referred to as the “springback modulus,” decreases with plastic prestrain rapidly for prestrain values <2 percent and decays slowly for larger values of prestrain, while the average Poisson’s ratio during unloading increases with plastic prestrain initially rapidly and then remains almost unchanged at larger prestrain. Changes in the springback modulus and Poisson’s ratio are shown to be due to recovery of microplastic strain and not due to viscoelastic effects. Springback modulus and Poisson’s ratio are anisotropic, showing a maximum in modulus and a minimum in Poisson’s ratio at 45 deg to rolling direction. To describe the combination of recoverable inelastic and elastic deformation as a function of plastic prestrain, a set of equations has been developed based upon a previously developed constitutive model. Calculated results are capable of explaining experimental results on modulus and Poisson’s ratio changes. Implication of the results on “springback” is illustrated and empirical relations are obtained.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElastic and Inelastic Recovery After Plastic Deformation of DQSK Steel Sheet
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1491574
dc.journal.fristpage237
dc.journal.lastpage246
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsSteel sheet
dc.keywordsStress
dc.keywordsPoisson ratio
dc.keywordsFlow (Dynamics)
dc.keywordsElasticity AND Equations
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record