Show simple item record

dc.contributor.authorEun-chae Jeon
dc.contributor.authorJoo-Seung Park
dc.contributor.authorDongil Kwon
dc.date.accessioned2017-05-09T00:10:20Z
dc.date.available2017-05-09T00:10:20Z
dc.date.copyrightOctober, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27052#406_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128469
dc.description.abstractThe continuous indentation test, which applies an indentation load to a material and records the indentation depth, yields indentation tensile properties whose accuracy can vary depending on such experimental parameters as number of unloadings, unloading ratio, maximum depth ratio and indenter radius. The Taguchi method was used to quantify their effects and to determine their optimum values. Using signal-to-noise ratio calculated from the error in the indentation tensile properties, the criterions and the optimum values for the experimental parameters were presented. The indentation tensile properties evaluated with the optimum parameters were in better agreement with the tensile properties.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStatistical Analysis of Experimental Parameters in Continuous Indentation Tests Using Taguchi Method
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1605115
dc.journal.fristpage406
dc.journal.lastpage411
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsStatistical analysis AND Taguchi methods
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record