Show simple item record

dc.contributor.authorBaoxiang Shan
dc.contributor.authorAssimina A. Pelegri
dc.date.accessioned2017-05-09T00:10:19Z
dc.date.available2017-05-09T00:10:19Z
dc.date.copyrightOctober, 2003
dc.date.issued2003
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27052#353_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128460
dc.description.abstractThe complex fracture behavior of a cross-ply composite cantilever beam with artificially embedded delamination is investigated analytically, numerically, and experimentally. The analysis of the cantilever beam is divided into two geometric configurations: the global bending of the undelaminated cantilever, and the local buckling of the delaminated part. A finite element model developed in ANSYS is used to concurrently analyze the effects of contact zone and delamination in the aforementioned asymmetrically loaded structure. The obtained experimental data are correlated and compared with the findings of the FEM simulations. All numerical, analytical, and experimental results illustrate that the fracture behavior of the laminate cantilever beam is dominated by mode II, mainly due to the effect of a large contact zone. The latter is determined by geometric and loading parameters. The dominance of mode II over mode I, leads to the initiation and propagation of an interfacial crack rather than an intralayer one. Furthermore, experimental evidence indicates that crack kinking during propagation depends on the architecture of the specimens.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAssessment of the Fracture Behavior of an Asymmetrically Loaded Cantilever Composite Structure
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1605108
dc.journal.fristpage353
dc.journal.lastpage360
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsCantilever beams
dc.keywordsStress
dc.keywordsFracture (Process)
dc.keywordsCantilevers
dc.keywordsDelamination AND Buckling
dc.treeJournal of Engineering Materials and Technology:;2003:;volume( 125 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record