Show simple item record

dc.contributor.authorHelen A. Ferguson
dc.contributor.authorS.A. (Raj) Mehta
dc.contributor.authorR. Gordon Moore
dc.contributor.authorNancy E. Okazawa
dc.contributor.authorMatthew G. Ursenbach
dc.date.accessioned2017-05-09T00:09:58Z
dc.date.available2017-05-09T00:09:58Z
dc.date.copyrightSeptember, 2003
dc.date.issued2003
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26512#177_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128271
dc.description.abstractThis investigation is directly relevant to various applications associated with the safety aspects of underbalanced drilling operations where de-oxygenated air may be co-injected with oil-based drilling fluid. However, de-oxygenated air often still contains up to 5% oxygen by volume. This residual oxygen can react with oil during the drilling process, thereby forming potentially hazardous oxidized hydrocarbons and compromising the safety of drilling operations. This article examines the conditions and processes by which oxidation reactions occur and may be helpful in reducing risk in drilling operations. This project characterizes the oxidation behavior of several oils and a typical oil-based drilling fluid at atmospheric and elevated pressures using thermogravimetry (TG) and pressurized differential scanning calorimetry (PDSC). Tests performed on mineral matrix (core) from the oil reservoirs showed no reactivity in both inert and oxidizing atmospheres. In an inert atmosphere, tests on all hydrocarbon samples showed only vaporization, no reactivity. In an oxidizing environment, the tests on hydrocarbons showed several oxidation regions. The presence of core had no effect on the behavior of the hydrocarbons tested in an inert atmosphere but accelerated the higher temperature oxidation reactions of the oil samples. The oil-based drilling fluid exhibited the opposite effect—the presence of core material retarded the oxidation reactions. This is perhaps due to the presence of an oxygen scavenger reacting with oxygen-containing clays present in the mineral matrix. In all tests performed on mixtures of hydrocarbon and core in oxidizing atmospheres, elevated pressures resulted in acceleration of the lower and higher temperature reaction regions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOxidation Characteristics of Light Hydrocarbons for Underbalanced Drilling Applications
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1586935
dc.journal.fristpage177
dc.journal.lastpage182
dc.identifier.eissn1528-8994
dc.keywordsFlow (Dynamics)
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsFluids
dc.keywordsDrilling
dc.keywordsoxidation
dc.keywordsPetroleum AND Oxygen
dc.treeJournal of Energy Resources Technology:;2003:;volume( 125 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record