Show simple item record

dc.contributor.authorNoah D. Manring
dc.contributor.authorSuresh B. Kasaragadda
dc.date.accessioned2017-05-09T00:09:46Z
dc.date.available2017-05-09T00:09:46Z
dc.date.copyrightSeptember, 2003
dc.date.issued2003
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26320#396_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128115
dc.description.abstractIn this paper, the theoretical flow ripple of an external gear pump is studied for pumps of similar size using different numbers of teeth on the driving and driven gears. In this work, the flow ripple equation is derived based upon the flow of incompressible fluid across the changing boundaries of a control volume. From this method, it is shown that the instantaneous length of action within the gear mesh determines the instantaneous flow ripple. A numerical and a closed-form approximation are presented for the instantaneous length of action and it is shown that the difference between these two solutions is negligible. Fast Fourier transform analysis is employed for identifying the harmonic frequencies and amplitudes of the flow pulse and these results are compared for 16 different pump designs. In summary, the results of this study show that the driving gear dictates the flow ripple characteristics of the pump while the driven gear dictates the pump size. As a result, it may be advantageous to design an external gear pump with a large number of teeth on the driving gear and a fewer number of teeth on the driven gear. This design configuration will tend to reduce both the physical pump size (without reducing the volumetric displacement of the pump) and the amplitude of the flow pulsation, while increasing the natural harmonic frequencies of the machine.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Theoretical Flow Ripple of an External Gear Pump
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1592193
dc.journal.fristpage396
dc.journal.lastpage404
dc.identifier.eissn1528-9028
dc.keywordsFlow (Dynamics)
dc.keywordsGear pumps
dc.keywordsGears
dc.keywordsPumps
dc.keywordsEquations
dc.keywordsDesign AND Displacement
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2003:;volume( 125 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record