Show simple item record

dc.contributor.authorShoichi Yoshida
dc.date.accessioned2017-05-09T00:08:33Z
dc.date.available2017-05-09T00:08:33Z
dc.date.copyrightFebruary, 2002
dc.date.issued2002
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28414#59_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/127379
dc.description.abstractThe bottom plate of aboveground oil storage tanks can bulge, separating from the foundation due to welding deformation. When such a bulge is subjected to liquid pressure, it deforms continuously to make contact with the foundation from the edge, and the remaining area of the bulge decreases with increasing liquid pressure. As a result, the deformation is extremely localized and plastic strain occurs at the bulge. This paper presents a plane strain finite element analysis for the evaluation of localized bottom bulges in aboveground oil storage tanks. Load-incremental, elastic-plastic large deformation analysis is carried out considering the bottom plate contact with the foundation. The relationship of the plastic strain at the bulged bottom plate to the liquid pressure is discussed together with the deformation of the bulge. As a result, the bottom plate thickness has a significant effect on the deformation, but the bulged height does not. After the bulged center makes contact with the foundation, the stress and strain do not increase with increasing liquid pressure. In addition, the permissible bulged profile specified by API Standard 653 elastically deforms to make contact with the foundation under low liquid pressure.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBehavior of Localized Bottom Bulge in Aboveground Oil Storage Tanks Under Liquid Pressure
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1426406
dc.journal.fristpage59
dc.journal.lastpage65
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsDeformation
dc.keywordsStress
dc.keywordsStorage tanks
dc.keywordsThickness AND American Petroleum Institute
dc.treeJournal of Pressure Vessel Technology:;2002:;volume( 124 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record