Show simple item record

dc.contributor.authorShuguang Li
dc.contributor.authorJohn Cook
dc.date.accessioned2017-05-09T00:08:31Z
dc.date.available2017-05-09T00:08:31Z
dc.date.copyrightMay, 2002
dc.date.issued2002
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28417#215_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/127363
dc.description.abstractThis paper is concerned with the membrane shell analysis of filament overwound toroidal pressure vessels and optimum design of such pressure vessels using the results of the analysis by means of mathematical nonlinear programming. The nature of the coupling between overwind and linear has been considered based on two extreme idealizations. In the first, the overwind is rigidly coupled with the liner, so that the two deform together in the meridional direction as the vessel dilates. In the second, the overwind is free to slide relative to the linear, but the overall elongations of the two around a meridian are identical. Optimized designs with the two idealizations show only minor differences, and it is concluded that either approximation is satisfactory for the purposes of vessel design. Aspects taken into account are the intrinsic overwind thickness variation arising from the winding process and the effects of fiber pre-tension. Pre-tension can be used not only to defer the onset of yielding, but also to achieve a favorable in-plane stress ratio which minimizes the von Mises equivalent stress in the metal liner. Aramid fibers are the most appropriate fibers to be used for the overwind in this type of application. The quantity of fiber required is determined by both its short-term strength and its long-term stress rupture characteristics. An optimization procedure for the design of such vessels, taking all these factors into account, has been established. The stress distributions in the vessels designed in this way have been examined and discussed through the examples. A design which gives due consideration of possible mechanical damage to the surface of the overwind has also been addressed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Analysis of Filament Overwound Toroidal Pressure Vessels and Optimum Design of Such Structures
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1430671
dc.journal.fristpage215
dc.journal.lastpage222
dc.identifier.eissn1528-8978
dc.keywordsPressure vessels
dc.keywordsStress
dc.keywordsDesign
dc.keywordsRupture
dc.keywordsVessels
dc.keywordsThickness
dc.keywordsTension
dc.keywordsFibers
dc.keywordsMembranes
dc.keywordsShells AND Optimization
dc.treeJournal of Pressure Vessel Technology:;2002:;volume( 124 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record