Show simple item record

dc.contributor.authorChiaki Miyasaka
dc.contributor.authorShun-Ichiro Tanaka
dc.contributor.authorBernard R. Tittmann
dc.date.accessioned2017-05-09T00:08:26Z
dc.date.available2017-05-09T00:08:26Z
dc.date.copyrightAugust, 2002
dc.date.issued2002
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28420#336_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/127343
dc.description.abstractIt is well known that the process of heating and then cooling dissimilar materials introduces considerable stress at and near the interface. In this article, first, the surface wave velocity distributions obtained with the V(z) curve technique were found to compare well with residual stress distribution measured by the finely collimated X-ray diffraction technique. Second, a delamination was introduced at the interface. The V(z) curve technique was then used again to measure the surface acoustic wave velocity along the interface. The defective specimens showed significantly different patterns of surface acoustic wave velocities. Thus, this study presents useful guidelines in discriminating between sound and defective ceramic/metal joints by scanning acoustic microscopy.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCharacterization of Stress at a Ceramic/Metal Joined Interface by the V(z) Technique of Scanning Acoustic Microscopy
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1480824
dc.journal.fristpage336
dc.journal.lastpage342
dc.identifier.eissn1528-8978
dc.keywordsMetals
dc.keywordsCeramics
dc.keywordsAcoustics
dc.keywordsStress
dc.keywordsSurface acoustic waves
dc.keywordsMicroscopy
dc.keywordsLenses (Optics)
dc.keywordsWaves
dc.keywordsDelamination AND Sound
dc.treeJournal of Pressure Vessel Technology:;2002:;volume( 124 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record