Show simple item record

dc.contributor.authorL. Pan
dc.contributor.authorR. Seshadri
dc.date.accessioned2017-05-09T00:08:24Z
dc.date.available2017-05-09T00:08:24Z
dc.date.copyrightNovember, 2002
dc.date.issued2002
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28422#433_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/127322
dc.description.abstractThe procedures described in this paper for determining a limit load is based on Mura’s extended variational formulation. Used in conjunction with linear elastic finite element analyses, the approach provides a robust method to estimate limit loads of mechanical components and structures. The secant modulus of the various elements in a finite element discretization scheme is prescribed in order to simulate the distributed effect of the plastic flow parameter, μ0. The upper and lower-bound multipliers m0 and m′ obtained using this formulation converge to near exact values. By using the notion of “leap-frogging” to limit state, an improved lower-bound multiplier, mα, can be obtained. The condition for which mα is a reasonable lower bound is discussed in this paper. The method is applied to component configurations such as cylinder, torispherical head, indeterminate beam, and a cracked specimen.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLimit Load Estimation Using Plastic Flow Parameter in Repeated Elastic Finite Element Analyses
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1499960
dc.journal.fristpage433
dc.journal.lastpage439
dc.identifier.eissn1528-8978
dc.keywordsDeformation
dc.keywordsStress AND Finite element analysis
dc.treeJournal of Pressure Vessel Technology:;2002:;volume( 124 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record