Show simple item record

dc.contributor.authorSeung-Hyun Hong
dc.contributor.authorDong Nyung Lee
dc.date.accessioned2017-05-09T00:07:37Z
dc.date.available2017-05-09T00:07:37Z
dc.date.copyrightJanuary, 2002
dc.date.issued2002
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27029#13_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/126886
dc.description.abstractA study has been made of the deformation and recrystallization textures of 99.99% pure copper sheets which were cross rolled by 82 and 96% reduction in thickness and recrystallized in a salt bath at 450°C for 1h. The deformation texture was approximated by the {011}〈755〉 orientation as the major component and {001}〈100〉 as a minor component. These deformation texture components were well simulated using the rate sensitive relaxed constraints model. The {001}〈100〉 orientation was calculated to be metastable while the {011}〈755〉 orientation was located in the middle of the rotation path between the stable orientations in two cross rolling directions. The recrystallization texture in the center layer of the 96% cross-rolled copper sheet was approximated by {86 50 9}〈10 34 94〉 for each rolling direction. The evolution of the recrystallization texture was discussed based on the strain energy release maximization model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDeformation and Recrystallization Textures in Cross-Rolled Copper Sheet
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1419017
dc.journal.fristpage13
dc.journal.lastpage22
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsCopper
dc.keywordsRecrystallization AND Texture (Materials)
dc.treeJournal of Engineering Materials and Technology:;2002:;volume( 124 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record