Show simple item record

dc.contributor.authorJong-Ning Aoh
dc.contributor.authorChung-Sheng Wei
dc.contributor.authorPh. D. Candidate
dc.date.accessioned2017-05-09T00:07:36Z
dc.date.available2017-05-09T00:07:36Z
dc.date.copyrightApril, 2002
dc.date.issued2002
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27032#250_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/126879
dc.description.abstractOne of the important factors affecting the accuracy of stress values obtained from the hole-drilling method is the calibration coefficient. A three-dimensional model was established to determine the calibration coefficients for integral method. The constraint conditions and loading conditions during hole-drilling can be simulated more realistically with this method. With this new model, coefficients āi,j and b̄i,j could be determined within one computation procedure. The relationship between calibration coefficients and plate thickness was investigated over a wide range of plate thickness. It has been found that the calibration coefficients determined in this work may vary with thickness of plates and the thickness range for thin plates was thus well defined. The calibration coefficients can thus be extended to measure the residual stresses of either thin or thick plates. Comparison of calibration coefficients with those determined by other studies was also conducted.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Improvement of Calibration Coefficients for Hole-Drilling Integral Method: Part I—Analysis of Calibration Coefficients Obtained by a 3-D FEM Model
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1416685
dc.journal.fristpage250
dc.journal.lastpage258
dc.identifier.eissn1528-8889
dc.keywordsDrilling
dc.keywordsCalibration
dc.keywordsFinite element model
dc.keywordsFinite element methods
dc.keywordsThickness AND Stress
dc.treeJournal of Engineering Materials and Technology:;2002:;volume( 124 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record