Show simple item record

dc.contributor.authorS. A. Namjoshi
dc.contributor.authorV. K. Jain
dc.contributor.authorS. Mall
dc.date.accessioned2017-05-09T00:07:36Z
dc.date.available2017-05-09T00:07:36Z
dc.date.copyrightApril, 2002
dc.date.issued2002
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27032#222_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/126874
dc.description.abstractThe effects of shot-peening on the fretting fatigue behavior of titanium alloy, Ti-6Al-4V were investigated. Specimens were shot-peened as per AMS 2432 standard. X-ray diffraction analysis measured a maximum compressive stress of 800 MPa at the specimen surface, which reduced to zero at a depth of 188 μm. The compensatory residual tensile stress in the specimen was estimated using a curve fitting technique, the maximum value of which was found to be 260 MPa at a depth of 255 μm. Fretting fatigue tests were conducted at room temperature at a cyclic frequency of 200 Hz. Scanning electron microscopy of the shot-peened fretting fatigue specimens showed that the crack initiated at a point below the contact surface, the depth of which was in the range of 200–300 μm. Finite element analysis of the fretting fatigue specimens was also conducted. Fatigue life diagrams were established for the fretting fatigue specimens with and without shot-peening, and were compared to those under the plain fatigue condition, i.e. without fretting. Shot-peening improved the fretting fatigue life of Ti-6Al-4V; furthermore, it moved the crack initiation site from the fretting contact region to a region inside the specimen. Moreover, stress analysis showed that the fatigue failure of shot-peened specimens was caused by the compensatory tensile residual stress.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Shot-Peening on Fretting-Fatigue Behavior of Ti-6Al-4V
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1448323
dc.journal.fristpage222
dc.journal.lastpage228
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsShot peening
dc.keywordsStress
dc.keywordsFinite element analysis
dc.keywordsTension AND Compressive stress
dc.treeJournal of Engineering Materials and Technology:;2002:;volume( 124 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record