Show simple item record

dc.contributor.authorJidong Kang
dc.contributor.authorVisiting Scientist
dc.contributor.authorW. Steven Johnson
dc.contributor.authorDavid A. Clark
dc.date.accessioned2017-05-09T00:07:35Z
dc.date.available2017-05-09T00:07:35Z
dc.date.copyrightApril, 2002
dc.date.issued2002
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27032#140_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/126861
dc.description.abstractA three-dimensional finite element analysis is developed for the cold expansion process in two aluminum alloys, 2024-T351 and 7050-T7451. The entire cold working process including hole expansion, elastic recovery, and finish reaming is simulated. Both isotropic hardening and kinematic hardening models are considered in the numerical calculations. The results suggest that a three-dimensional nature exists in the residual stress fields surrounding the hole. There are significant differences in residual stresses at different sections through the thickness. However, residual stress at the surface is shown to remain the same for the different plastic hardening models after the hole has recovered and finish reaming has been performed. The reaming of the material around the hole has slight effect on the maximum value and distribution of residual stresses. A comparison has been drawn between the FEA of average through thickness strain and a previous experimental investigation of strain that utilized neutron diffraction and modified Sachs boring on a 7050 aluminum specimen containing a cold expanded hole. The different methods show very good agreement in the magnitude of strain as well as the general trend. The conclusions obtained here are beneficial to the understanding of the phenomenon of fatigue crack initiation and growth at the perimeter of cold worked holes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThree-Dimensional Finite Element Analysis of the Cold Expansion of Fastener Holes in Two Aluminum Alloys
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1448922
dc.journal.fristpage140
dc.journal.lastpage145
dc.identifier.eissn1528-8889
dc.keywordsAluminum alloys
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsFasteners
dc.keywordsFinishes
dc.keywordsHardening
dc.keywordsFinite element analysis
dc.keywordsThickness
dc.keywordsNeutron diffraction AND Work hardening
dc.treeJournal of Engineering Materials and Technology:;2002:;volume( 124 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record