Show simple item record

dc.contributor.authorRichard W. Davies
dc.contributor.authorWilliam C. Kinsel
dc.contributor.authorHussein M. Zbib
dc.contributor.authorMohammad A. Khaleel
dc.date.accessioned2017-05-09T00:07:34Z
dc.date.available2017-05-09T00:07:34Z
dc.date.copyrightApril, 2002
dc.date.issued2002
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27032#125_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/126859
dc.description.abstractThe cold pilger metal forming technique is known to produce round titanium alloy tubing with mechanical properties that may be significantly anisotropic. These mechanical properties are of interest to both the manufacturers and consumers for defining initial manufacturing limitations and defining the final product design limitations. This study focuses on experimentally characterizing the yield locus development of Ti-3Al-2.5V seamless tubing during cold pilgering and a subsequent thermal stress relieving process. The materials are experimentally characterized using a biaxial testing apparatus, which subjects the specimen tubes to combined axial load and internal pressure. The Hill yield criterion is subsequently fit to the experimental results producing continuous yield loci. Each specimen is also experimentally characterized using X-ray diffraction to gain insight into the material textures that accompany the macroscopic properties. All work is focused on one particular pilger pass at two different production rates. A second experimental variable is introduced to the study by using two significantly different input materials, as characterized by X-ray diffraction. This study also investigates the nature of the plastic deformation of the tubing developed during cold pilgering via finite element analysis and discusses the relationship between the finite element predictions and the mechanical anisotropy.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnisotropic Yield Locus Evolution During Cold Pilgering of Titanium Alloy Tubing
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1446472
dc.journal.fristpage125
dc.journal.lastpage134
dc.identifier.eissn1528-8889
dc.keywordsTitanium alloys
dc.keywordsStress
dc.keywordsTubing
dc.keywordsDeformation
dc.keywordsTexture (Materials)
dc.keywordsFinite element analysis
dc.keywordsTesting
dc.keywordsAnisotropy
dc.keywordsManufacturing
dc.keywordsMechanical properties
dc.keywordsX-ray diffraction
dc.keywordsModeling AND Finite element model
dc.treeJournal of Engineering Materials and Technology:;2002:;volume( 124 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record