Show simple item record

dc.contributor.authorD. A. Mosher
dc.contributor.authorM. I. Baskes
dc.contributor.authorV. C. Prantil
dc.contributor.authorS. J. Plimpton
dc.contributor.authorM. F. Horstemeyer
dc.contributor.authorJ. Lim
dc.contributor.authorW. Y. Lu
dc.date.accessioned2017-05-09T00:07:34Z
dc.date.available2017-05-09T00:07:34Z
dc.date.copyrightJuly, 2002
dc.date.issued2002
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27037#322_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/126846
dc.description.abstractWe analyze simple shear and torsion of single crystal copper by employing experiments, molecular dynamics simulations, and finite element simulations in order to focus on the kinematic responses and the apparent yield strengths at different length scales of the specimens. In order to compare torsion with simple shear, the specimens were designed to be of similar size. To accomplish this, the ratio of the cylinder circumference to the axial gage length in torsion equaled the ratio of the length to height of the simple shear specimens (0.43). With the [110] crystallographic direction parallel to the rotational axis of the specimen, we observed a deformation wave of material that oscillated around the specimen in torsion and through the length of the specimen in simple shear. In torsion, the ratio of the wave amplitude divided by cylinder circumference ranged from 0.02–0.07 for the three different methods of analysis: experiments, molecular dynamics simulations, and finite element simulations. In simple shear, the ratio of the deformation wave amplitude divided by the specimen length and the corresponding values predicted by the molecular dynamics and finite element simulations (simple shear experiments were not performed) ranged from 0.23–0.26. Although each different analysis method gave similar results for each type boundary condition, the simple shear case gave approximately five times more amplitude than torsion. We attributed this observation to the plastic spin behaving differently as the simple shear case constrained the dislocation activity to planar double slip, but the torsion specimen experienced quadruple slip. The finite element simulations showed a clear relation with the plastic spin and the oscillation of the material wave. As for the yield stress in simple shear, a size scale dependence was found regarding two different size atomistic simulations for copper (332 atoms and 23628 atoms). We extrapolated the atomistic yield stresses to the order of a centimeter, and these comparisons were close to experimental data in the literature and the present study.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTorsion/Simple Shear of Single Crystal Copper
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1480407
dc.journal.fristpage322
dc.journal.lastpage328
dc.identifier.eissn1528-8889
dc.keywordsShear (Mechanics)
dc.keywordsTorsion
dc.keywordsEngineering simulation
dc.keywordsFinite element analysis
dc.keywordsCrystals
dc.keywordsCopper
dc.keywordsDeformation
dc.keywordsMolecular dynamics simulation
dc.keywordsCylinders
dc.keywordsDislocations AND Boundary-value problems
dc.treeJournal of Engineering Materials and Technology:;2002:;volume( 124 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record