Show simple item record

dc.contributor.authorJ. D. Clayton
dc.contributor.authorS. Graham
dc.contributor.authorB. M. Schroeter
dc.contributor.authorD. L. McDowell
dc.date.accessioned2017-05-09T00:07:33Z
dc.date.available2017-05-09T00:07:33Z
dc.date.copyrightJuly, 2002
dc.date.issued2002
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27037#302_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/126843
dc.description.abstractHigh resolution experimental characterization of material stretch and rotation fields in relatively fine-grained polycrystals has been limited, inhibiting direct comparison with predictions of crystal plasticity theory. In this study, micron scale grids used more commonly in etching of substrates for microelectronic circuits were deposited on specimens of Oxygen Free High Conductivity Copper (OFHC Cu) subsequently subjected to uniaxial compressive deformations to effective strain levels up to unity. Material stretch and rotation fields were assessed for fields of view encompassing on the order of 20 grains. Some rather striking features emerge, including the apparent relative lack of deformation in regions sized on the order of large grains, and the apparent concentration of stretch and rotation in bands surrounding these relatively undeformed areas. Comparisons are drawn with results of 3D crystal plasticity calculations performed on digitized grain structures that conform to representative microstructures in terms of initial grain size and shape distributions. The crystal plasticity simulations predict regions of relatively large rotation and relatively localized stretch traversing multiple grains. The numerical solutions also exhibit slightly higher local stresses in the vicinity of grain boundaries and triple points than in grain interiors, a phenomenon attributed to local lattice misorientation among neighboring grains. However, the crystal plasticity calculations do not, in an average sense, predict larger-than-average maximum stretch or rotation in the grain boundary regions. The numerical solutions are also quite sensitive to initial lattice orientations assigned to the grains. Comments are made regarding the segmentation of slip within the grains and its implications for modeling, based upon direct comparison of results from experiments and simulations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDistributions of Stretch and Rotation in Polycrystalline OFHC Cu
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1479354
dc.journal.fristpage302
dc.journal.lastpage313
dc.identifier.eissn1528-8889
dc.keywordsRotation
dc.keywordsPlasticity
dc.keywordsDeformation
dc.keywordsCrystals
dc.keywordsGrain boundaries
dc.keywordsStress
dc.keywordsEngineering simulation
dc.keywordsCompression AND Grain size
dc.treeJournal of Engineering Materials and Technology:;2002:;volume( 124 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record