Show simple item record

dc.contributor.authorH. Karasawa
dc.contributor.authorJ. C. Rowley
dc.contributor.authorT. Ohno
dc.contributor.authorM. Kosugi
dc.date.accessioned2017-05-09T00:07:14Z
dc.date.available2017-05-09T00:07:14Z
dc.date.copyrightSeptember, 2002
dc.date.issued2002
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26504#133_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/126653
dc.description.abstractNew methods to estimate both the rock strength and tooth wear while drilling with roller-bits were developed and proposed in Part 1. These methods were derived from the results of drilling tests using milled-tooth type three-cone bits with different amounts of tooth wear. In this report, these methods were extended and applied to insert type three-cone bits. The validity of the test and data analyses techniques of Part 1 were confirmed for insert bits. The methods to estimate the tooth wear proposed in Part 1 were based on the drillability strength of rock. A new approach to determine the tooth wear is presented. This new approach could be more readily applied to evaluating tooth wear when compared to the previous methods based on the drillability strength of rock.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMethods to Estimate the Rock Strength and Tooth Wear While Drilling With Roller-Bits—Part 2: Insert Bits
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1482406
dc.journal.fristpage133
dc.journal.lastpage140
dc.identifier.eissn1528-8994
dc.keywordsWear
dc.keywordsDrilling
dc.keywordsRocks AND Rollers
dc.treeJournal of Energy Resources Technology:;2002:;volume( 124 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record