Show simple item record

dc.contributor.authorI. Sharf
dc.contributor.authorG. Gilardi
dc.contributor.authorC. Crawford
dc.date.accessioned2017-05-09T00:07:01Z
dc.date.available2017-05-09T00:07:01Z
dc.date.copyrightDecember, 2002
dc.date.issued2002
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26308#529_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/126484
dc.description.abstractCorrect modeling of friction forces during constrained robotic operations is critical to high-fidelity contact dynamics simulation. Such simulations are particularly important for the development, mission planning and operations analysis of space robotic systems. Most existing friction models employ the coefficient of friction to capture the relationship between the friction force and the normal load. Hence, accurate identification of this parameter is prerequisite to accurate simulation. This issue is particularly important for space robotic operations since friction characteristics of materials are very different in space. In this manuscript, the problem of identification of the coefficient of friction is investigated experimentally and numerically. The motivating application being space manipulator systems, our principal objective is to develop a practical off-line identification algorithm, requiring minimum number of measurements from sensors available on space robots. To this end, a strategy is proposed to determine the coefficient of friction by using only the measured end-effector forces. The key idea behind the method is that during one-point contact, these forces represent the contact force and hence, can be directly used to calculate the coefficient of friction. The proposed approach is tested with the experimental data from peg insertion experiments conducted on a planar robotics test-bed with a specially designed contact interface. The algorithm is generalized to arbitrary complex geometries and applied to identify the coefficient of friction for a simulated battery drop test.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIdentification of Friction Coefficient for Constrained Robotic Tasks
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1514667
dc.journal.fristpage529
dc.journal.lastpage538
dc.identifier.eissn1528-9028
dc.keywordsForce
dc.keywordsFriction
dc.keywordsRobotics
dc.keywordsAlgorithms
dc.keywordsGeometry
dc.keywordsForce sensors AND Measurement
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2002:;volume( 124 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record