Show simple item record

dc.contributor.authorTakashi Ogata
dc.contributor.authorMasatsugu Yaguchi
dc.date.accessioned2017-05-09T00:05:50Z
dc.date.available2017-05-09T00:05:50Z
dc.date.copyrightFebruary, 2001
dc.date.issued2001
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28407#105_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125780
dc.description.abstractCreep-fatigue tests on the heat-affected zone(HAZ) simulated materials, base metal, weld metal and weld joint of 2.25Cr-1Mo steel, and elastic-plastic and creep FEM analysis for the weld joint were conducted. It was found from the comparison between experimental evidences and the analytical results that “Type IV” cracking was caused by two major reasons. One is accumulation of creep strain during strain hold in the fine-grain region is larger than that in other regions, suggesting progress of creep damage in the fine-grain region prior to other regions. The other is existence of triaxial tensile stress field within the fine-grain region caused reduction of failure ductility. Crack initiation portion and failure life under the creep-fatigue test could be well predicted by the nonlinear damage accumulation model based on the FEM analysis results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStudy on Creep-Fatigue Damage Evaluation for Boiler Weldment Parts
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1339979
dc.journal.fristpage105
dc.journal.lastpage111
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsFatigue
dc.keywordsHeating boilers
dc.keywordsFracture (Process)
dc.keywordsStress AND Ductility
dc.treeJournal of Pressure Vessel Technology:;2001:;volume( 123 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record