Show simple item record

dc.contributor.authorLevi O. Bueno
dc.contributor.authorLuiz Marino
dc.date.accessioned2017-05-09T00:05:50Z
dc.date.available2017-05-09T00:05:50Z
dc.date.copyrightFebruary, 2001
dc.date.issued2001
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28407#97_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125779
dc.description.abstractThe oxide-scale growth and metal loss kinetics during oxidation in air of 2 1/4 Cr-1 Mo steel were studied at 600, 700, and 800°C for times up to 1000 h, with cylindrical specimens similar to creep test pieces. The scale thickness (x) was observed to exhibit a gradually decreasing growth rate with the exposure time (t) according to approximated parabolic behavior of type x2=Kos⋅t at the temperature levels of 700 and 800°C. The coefficient Kos exhibited Arrhenius-type temperature dependence with an activation energy value of 212 kJ/mol. At 600°C, parabolic behavior was not verified, and the scale thickness growth follows better a relation of type log(x)=A+B⋅log(t). The metal thickness (y) was observed to exhibit a gradually decreasing loss rate with the exposure time according to parabolic behavior of type y2=Kml⋅t at the three temperature levels. The coefficient Kml also exhibited Arrhenius-type dependence with an activation energy value of 215 kJ/mol. These two values of Q are close do the value for diffusion of iron on the chromium-rich internal oxide layer formed in the material. Based on the equations of metal loss kinetics, the variation of the cross-sectional area of the specimens with time could be determined and plots of stress enhancement factors developed to assess the effect of oxidation on creep testing results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh-Temperature Oxidation Behavior of 214Cr-1Mo Steel in Air–Part 2: Scale Growth, Metal Loss Kinetics, and Stress Enhancement Factors During Creep Testing
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1335498
dc.journal.fristpage97
dc.journal.lastpage104
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsMetals
dc.keywordsSteel
dc.keywordsTesting
dc.keywordsoxidation
dc.keywordsThickness AND Stress
dc.treeJournal of Pressure Vessel Technology:;2001:;volume( 123 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record