Show simple item record

dc.contributor.authorF. V. Ellis
dc.contributor.authorD. R. Sielski
dc.contributor.authorR. Viswanathan
dc.date.accessioned2017-05-09T00:05:50Z
dc.date.available2017-05-09T00:05:50Z
dc.date.copyrightFebruary, 2001
dc.date.issued2001
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28407#70_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125774
dc.description.abstractA research project was conducted to develop and validate an improved, analytical life prediction method for high-temperature turbine and valve studs/bolts. The life prediction method used the two-parameter creep equation, an incremental calculation procedure and a strain hardening flow rule. The failure criterion was an accumulated inelastic or creep strain limit of 1 percent. The life prediction procedure recommends the use of the service history of operating temperature, number/stress level of tightenings, cycle time, etc., to calculate the stress relaxation behavior. Life assessment uses the measured bolt length to calculate the accumulated creep strain. The link between the current condition, i.e., accumulated creep strain, and the remaining creep life, i.e., time to accumulate 1 percent strain, is obtained by a prediction of the future creep strain accumulation under the intended loading cycle(s) imposed during future operation. In order to validate the approach, the calculated results were compared to the results of uniaxial stress relaxation testing, bolt model testing, and service experience. The analytical procedure coupled with other industry wide NDE and measurement procedures is expected to provide broad guidelines to utilities for bolting life assessment.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Improved Analytical Method for Life Prediction of Bolting
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1344240
dc.journal.fristpage70
dc.journal.lastpage74
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsTurbines
dc.keywordsValves
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsEquations
dc.keywordsCycles
dc.keywordsIndustrial plants
dc.keywordsCylinders AND Relaxation (Physics)
dc.treeJournal of Pressure Vessel Technology:;2001:;volume( 123 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record