Show simple item record

dc.contributor.authorHashem M. Mourad
dc.contributor.authorMaher Y. A. Younan
dc.date.accessioned2017-05-09T00:05:49Z
dc.date.available2017-05-09T00:05:49Z
dc.date.copyrightMay, 2001
dc.date.issued2001
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28100#253_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125763
dc.description.abstractThe behavior of a pipe bend, with bend factor h=0.1615(D=16 in.,R=24 in. and t=0.41 in.), subjected to out-of-plane bending and internal pressure is studied, taking geometric and material nonlinearity into account, using the finite element code ABAQUS. Material behavior is taken as elastic-perfectly plastic. The distribution of stress and strain along the axial direction and across the thickness of the bend is studied, with and without internal pressure, at the onset of yielding and at instability. Before instability is reached, through-the-thickness yielding appears at many points. The loaded end of the bend is found to be the most severely strained cross section. The circumferential distribution of stress and strain, and its variation with increased moment loading are then investigated for that section, at internal pressure values of zero and 1200 psi.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNonlinear Analysis of Pipe Bends Subjected to Out-of-Plane Moment Loading and Internal Pressure
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1310335
dc.journal.fristpage253
dc.journal.lastpage258
dc.identifier.eissn1528-8978
dc.keywordsTorque
dc.keywordsPressure
dc.keywordsPipe bends
dc.keywordsStress AND Stress
dc.treeJournal of Pressure Vessel Technology:;2001:;volume( 123 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record