Show simple item record

dc.contributor.authorY. K. Park
dc.contributor.authorK. S. Kim
dc.contributor.authorY. K. Chung
dc.contributor.authorJ. J. Park
dc.date.accessioned2017-05-09T00:05:47Z
dc.date.available2017-05-09T00:05:47Z
dc.date.copyrightMay, 2001
dc.date.issued2001
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28100#191_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125752
dc.description.abstractA combined experimental and computational study is carried out on creep crack growth in X20CrMoV 12 1 steel and its weld joint. Crack growth tests are conducted on compact specimens at 545°C. For weld specimens, the crack propagates in the heat-affected zone parallel to the fusion line. It is found that C*(t) correlates crack growth rates satisfactorily under the loads used in the test not only for base metal specimens but also for weld specimens. An elastic-plastic-steady-state creep analysis of crack growth is performed using a finite element code. Calculated load point displacement rates agree with experimental measurements during steady-state crack growth. The creep zone is asymmetric, and it becomes more so in weld specimens as the crack propagates. Yet the mode II effect appears to be insignificant.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCreep Crack Growth in X20CrMoV 12 1 Steel and Its Weld Joint
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1357159
dc.journal.fristpage191
dc.journal.lastpage196
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsSteel
dc.keywordsFracture (Materials)
dc.keywordsStress
dc.keywordsBase metals
dc.keywordsSteady state AND Displacement
dc.treeJournal of Pressure Vessel Technology:;2001:;volume( 123 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record