Show simple item record

dc.contributor.authorS. G. Lee
dc.contributor.authorI. S. Kim
dc.date.accessioned2017-05-09T00:05:47Z
dc.date.available2017-05-09T00:05:47Z
dc.date.copyrightMay, 2001
dc.date.issued2001
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28100#173_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125750
dc.description.abstractCorrosion fatigue tests were performed in air saturated hot water to assess fatigue crack growth behavior of reactor pressure vessel steel at the LWR operating condition. The main test parameter was loading frequency. Crack growth rate was increased with decreasing frequency until a critical frequency. It was found through fractographic study that the enhancement of crack growth rate was environmentally assisted by the hydrogen embrittlement, since brittle striations and cleavagelike facets with microvoid were formed in the crack growth process. The strain rate effects on crack growth rate were investigated through da/dt versus dε/dt curves. At intermediate range, there is a transient point which corresponds to an onset of dynamic strain aging and abruptly increases the crack growth rate; above the transient point, small-size-particle-enhanced brittle cracks, while only large-size-particle-enhanced brittle cracks before the transient. From the fractography, it is suggested that EAC may be enhanced by specific strain rate, and that EAC may be related to interactions of hydrogen with oxide film and to Luders band movement with a high strain gradient at inclusion/matrix interface.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStrain Rate Effects on the Fatigue Crack Growth of SA508 Cl.3 Reactor Pressure Vessel Steel in High-Temperature Water Environment
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1334378
dc.journal.fristpage173
dc.journal.lastpage178
dc.identifier.eissn1528-8978
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsPressure vessels
dc.keywordsFracture (Materials)
dc.keywordsFracture (Process)
dc.keywordsStress
dc.keywordsFatigue cracks
dc.keywordsWater
dc.keywordsBrittleness
dc.keywordsHydrogen AND Sulfur
dc.treeJournal of Pressure Vessel Technology:;2001:;volume( 123 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record