Show simple item record

dc.contributor.authorM. Itatani
dc.contributor.authorM. Kikuchi
dc.contributor.authorS. Suzuki
dc.contributor.authorK. Iida
dc.contributor.authorProfessor Emeritus of The University of Tokyo
dc.contributor.authorM. Asano
dc.date.accessioned2017-05-09T00:05:47Z
dc.date.available2017-05-09T00:05:47Z
dc.date.copyrightMay, 2001
dc.date.issued2001
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28100#166_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125749
dc.description.abstractFatigue crack growth data obtained in the simulated BWR water environment were analyzed to establish a formula for reference fatigue crack growth rate (FCGR) of austenitic stainless steels in BWR water. The effects of material, mechanical and environmental factors were taken into the reference curve, which was expressed as: da/dN=8.17×10−12⋅Tr0.5⋅ΔK3.0/(1−R)2.12(1≦ΔK≦50 MPam) where da/dN is fatigue crack growth rate in m/cycle, Tr is load rising time in seconds, ΔK is range (double amplitude) of K–value in MPam, and R is stress ratio. Tr=1 s if Tr<1 s, and Tr=1000 s if Tr cannot be defined. ΔK=Kmax−Kmin if R≧0.ΔK=Kmax if R<0.R=Kmin/Kmax. The proposed formula provides conservative FCGR at low stress ratio. Although only a few data show higher FCGR than that by proposed formula at high R, these data are located in a wide scatter range of FCGR and are regarded to be invalid. The proposed formula is going to be introduced in the Japanese Plant Operation and Maintenance Standard.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Crack Growth Curve for Austenitic Stainless Steels in BWR Environment
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1358841
dc.journal.fristpage166
dc.journal.lastpage172
dc.identifier.eissn1528-8978
dc.keywordsBoiling water reactors
dc.keywordsFatigue cracks
dc.keywordsStainless steel
dc.keywordsWater
dc.keywordsStress
dc.keywordsStress
dc.keywordsSteel
dc.keywordsFracture (Materials) AND Formulas
dc.treeJournal of Pressure Vessel Technology:;2001:;volume( 123 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record