Discussion of “On the Evaluation of Dynamic Stresses in Pipelines Using Limited Vibration Measurements and FEA in the Frequency Domain” (Moussa, W. A., and Abdelhamid, A. N., 1999, ASME J. Pressure Vessel Technol., 121, Aug., pp. 241–245)
Abstract
A practical technique in determining the dynamic stresses in pipelines using finite element method is investigated by Moussa et al.. The authors propose to create an FEA model to excite the piping structure by a single concentrated harmonic force at its midspan with frequencies ranging from 0 to 160 Hz. The dynamic vibrating displacements are then determined as well as the von Mises stress at all elements. The displacement responses are assumed as if they were measured and are then used as input to excite the model. The von Mises stress in both cases (force input and motion input) are compared together and plotted for different tested sections. For the case of a single displacement used as the loading source, the maximum differences are 0.0 and 9.4 percent for Sections 1 and 12, respectively (Fig. 2 of the paper).