Show simple item record

dc.contributor.authorClarence D. Miller
dc.date.accessioned2017-05-09T00:05:45Z
dc.date.available2017-05-09T00:05:45Z
dc.date.copyrightAugust, 2001
dc.date.issued2001
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28410#318_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125732
dc.description.abstractThe results of 190 model tests and failures of five torispherical heads in service are analyzed in this paper. Seventy-two of the heads failed by buckling of the knuckle and 17 of the heads were pressurized until the heads failed by bursting or by rupture of the crown. The test pressures were compared with the design pressures obtained from ASME Section VIII, Divs. 1 and 2 rules which are limited to heads with L/t≤500, ASME Code Cases 2260 and 2261 rules which are limited to heads with L/t≤500, the French Code CODAP rules which apply to heads with D/t ratios up to 1000, and the ECCS rules which apply to heads with D/t ratios up to 1250. The margins of safety were found to vary widely for all of the rules. A new set of rules has been developed for design of torispherical heads under internal pressure. The rules are applicable to heads with L/t or D/t ratios up to 2500 and apply to all ASME Code materials. The rules are based on three criteria: failure of the knuckle by buckling, limiting the maximum compressive strain in the knuckle to prevent gross distortions, and failure of the crown by bursting. The proposed rules provide a more accurate prediction of the buckling pressure and a more consistent upper limit on the compressive stress in the knuckle than any of the other rules considered in this paper.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBuckling Criteria for Torispherical Heads Under Internal Pressure
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1360692
dc.journal.fristpage318
dc.journal.lastpage323
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsBuckling
dc.keywordsEquations
dc.keywordsFailure AND Design
dc.treeJournal of Pressure Vessel Technology:;2001:;volume( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record