Show simple item record

dc.contributor.authorSanjeev K. Khanna
dc.contributor.authorCanlong He
dc.contributor.authorResearch Assistant
dc.contributor.authorHari N. Agrawal
dc.contributor.authorSenior Technical Specialist
dc.date.accessioned2017-05-09T00:05:05Z
dc.date.available2017-05-09T00:05:05Z
dc.date.copyrightJanuary, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27017#132_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125348
dc.description.abstractResidual stress distribution has been determined in spot welds, which are generally used to join mild steel sheets. Various spot weld configurations were investigated using the full-field, experimental, optical technique of high sensitivity moiré interferometry. These stresses were found to be in the range 250–300 MPa (tensile) in the center and decreased to 40–100 MPa (tensile) at the edge of the weld nugget. Low cycle fatigue loading of the spot weld caused the residual stress to drop in the weld center by about 30 percent and increase at the edges by as much as 100 percent.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResidual Stress Measurement in Spot Welds and the Effect of Fatigue Loading on Redistribution of Stresses Using High Sensitivity Moiré Interferometry
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1286218
dc.journal.fristpage132
dc.journal.lastpage138
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsStress
dc.keywordsWelded joints AND Interferometry
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record