Show simple item record

dc.contributor.authorAaron J. Hade
dc.contributor.authorA. Jeffrey Giacomin
dc.date.accessioned2017-05-09T00:05:05Z
dc.date.available2017-05-09T00:05:05Z
dc.date.copyrightJanuary, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27017#100_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125342
dc.description.abstractA numerical solution is presented for isothermal Newtonian wire coating under vacuum or with an externally applied pressure. Differential equations for the melt cone shape are derived from a force balance on the melt cone. Die design curves are then constructed from the solutions to these equations. These curves are helpful in predicting wire coating operating conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleWire Coating Under Vacuum
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1288213
dc.journal.fristpage100
dc.journal.lastpage105
dc.identifier.eissn1528-8889
dc.keywordsCoating processes
dc.keywordsCoatings
dc.keywordsVacuum
dc.keywordsWire
dc.keywordsForce
dc.keywordsShapes
dc.keywordsEquations AND Pressure
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record