Show simple item record

dc.contributor.authorA. A. Tseng
dc.contributor.authorM. H. Lee
dc.contributor.authorB. Zhao
dc.date.accessioned2017-05-09T00:05:04Z
dc.date.available2017-05-09T00:05:04Z
dc.date.copyrightJanuary, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27017#74_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125339
dc.description.abstractA droplet generator has been designed and built to make wax and tin alloy droplets for freeform fabrication. The linear stability theory of liquid jets for forming droplets is first reviewed. The analytical formula for predicting droplet size and breakup length at optimal conditions are then developed. The suitability of the formulas to be used for the present droplet deposition system is studied by comparing its prediction with the more accurate numerical results and previously published experimental data. Only the suitable formulation is adopted for the design and operation of the droplet generator system. Experiments have been conducted at a wide range of operating conditions including different nozzle sizes, jet velocities, and frequencies. Good agreements are found between the predictions based on the adopted analytical formulation and the experimental results. It has been found that using the present design and procedure recommended, the droplet sizes can be controlled having a size deviation of less than 3 percent and the shape variation of the deposited layer can be managed within 3 percent of its deposited width.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDesign and Operation of a Droplet Deposition System for Freeform Fabrication of Metal Parts
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1286187
dc.journal.fristpage74
dc.journal.lastpage84
dc.identifier.eissn1528-8889
dc.keywordsStability
dc.keywordsTemperature
dc.keywordsMetals
dc.keywordsManufacturing
dc.keywordsTin alloys
dc.keywordsWaves
dc.keywordsDesign
dc.keywordsNozzles
dc.keywordsFrequency
dc.keywordsGenerators
dc.keywordsViscosity
dc.keywordsDensity
dc.keywordsShapes
dc.keywordsSurface tension
dc.keywordsEquations
dc.keywordsFormulas AND Jets
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record