Show simple item record

dc.contributor.authorChulho Yang
dc.contributor.authorAshok V. Kumar
dc.date.accessioned2017-05-09T00:05:04Z
dc.date.available2017-05-09T00:05:04Z
dc.date.copyrightJanuary, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27017#20_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125332
dc.description.abstractSingle crystals of NiAl are very ductile at intermediate temperatures (400–700 K) and were observed to exhibit high strain hardening rates at large strains when loaded in the [110] orientation. The experimentally observed strain hardening in NiAl single crystals could not be predicted using simple hardening models and two-dimensional finite element analysis. The primary slip systems that activate during the deformation are (010)[100] and (100)[100], however, it has been hypothesized that activation of secondary slip on {011} slip planes may be responsible for the high rate of hardening observed. The hardening of intermetallic single crystals when multiple slip systems are activated is not well understood. To study this further, a three-dimensional hardening model and constitutive equations were implemented into a finite element analysis program. Since the parameters required to describe the hardening model such as latent hardening ratios are difficult to obtain experimentally, a parametric study was conducted to estimate values for these parameters that enable the prediction of the experimentally observed load versus elongation curves.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInvestigation of Strain Hardening in NiAl Single Crystals Using Three-Dimensional FEA Models
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1286158
dc.journal.fristpage20
dc.journal.lastpage27
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsCrystals
dc.keywordsStress
dc.keywordsHardening
dc.keywordsFinite element analysis
dc.keywordsWork hardening AND Shear (Mechanics)
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record