Show simple item record

dc.contributor.authorY. Shindo
dc.contributor.authorR. Wang
dc.contributor.authorH. Kudo
dc.contributor.authorK. Horiguchi
dc.contributor.authorResearch Associate
dc.date.accessioned2017-05-09T00:05:03Z
dc.date.available2017-05-09T00:05:03Z
dc.date.copyrightApril, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27019#191_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125320
dc.description.abstractAn experimental and analytical investigation in cryogenic Mode I interlaminar fracture behavior and toughness of SL-E woven glass-epoxy laminates was conducted. Double cantilever beam (DCB) tests were performed at room temperature (R.T.), liquid nitrogen temperature (77 K), and liquid helium temperature (4 K) to evaluate the effect of temperature and geometrical variations on the interlaminar fracture toughness. The fracture surfaces were examined by scanning electron microscopy to verify the fracture mechanisms. A finite element model was used to perform the delamination crack analysis. Critical load levels and the geometric and material properties of the test specimens were input data for the analysis which evaluated the Mode I energy release rate at the onset of delamination crack propagation. The results of the finite element analysis are utilized to supplement the experimental data.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDouble Cantilever Beam Measurement and Finite Element Analysis of Cryogenic Mode I Interlaminar Fracture Toughness of Glass-Cloth/Epoxy Laminates
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1345527
dc.journal.fristpage191
dc.journal.lastpage197
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsGlass
dc.keywordsTextiles
dc.keywordsCantilever beams
dc.keywordsLaminates
dc.keywordsStress
dc.keywordsEpoxy adhesives
dc.keywordsFinite element analysis
dc.keywordsFracture toughness
dc.keywordsDelamination
dc.keywordsFracture (Process)
dc.keywordsFracture (Materials)
dc.keywordsHelium AND Crack propagation
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record