Show simple item record

dc.contributor.authorN. Stenberg
dc.contributor.authorC. Fellers
dc.contributor.authorS. Östlund
dc.date.accessioned2017-05-09T00:05:03Z
dc.date.available2017-05-09T00:05:03Z
dc.date.copyrightApril, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27019#184_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125319
dc.description.abstractCreasing and offset printing are both examples of paperboard converting operations where the stress state is multiaxial, and where elastic-plastic deformation occurs in the thickness direction. Optimization of paperboard for such operations requires both advanced modeling and a better understanding of the mechanical behavior of the material. Today, our understanding and modeling of the out-of-plane properties are not as well established as our knowledge of the in-plane behavior. In order to bridge this gap, a modification of the Arcan device, which is well known in other fields, was developed for the experimental characterization of the out-of-plane mechanical behavior of paperboard. A fixture attached to the Arcan device was used to control the deformation in the test piece during loading. The test piece was glued to the device with a high viscosity adhesive and left stress-free during curing to achieve an initial state free of stresses. The apparatus proved to work well and to produce reliable results. Measurements of the mechanical behavior in combined normal and shear loading generated data points for the determination of the yield surface in the stress space. The elastic-plastic behavior in the thickness direction of paperboard was modeled assuming small-strain orthotropic linear elasticity and a quadratic yield function. Simulations using this yield function and an associative flow law showed good agreement with the test results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePlasticity in the Thickness Direction of Paperboard Under Combined Shear and Normal Loading
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1352747
dc.journal.fristpage184
dc.journal.lastpage190
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsPaperboard
dc.keywordsStress
dc.keywordsShear (Mechanics) AND Thickness
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record