Show simple item record

dc.contributor.authorE. S. Puchi-Cabrera
dc.date.accessioned2017-05-09T00:05:03Z
dc.date.available2017-05-09T00:05:03Z
dc.date.copyrightApril, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27019#149_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125314
dc.description.abstractPrimary rolling operations of twin-roll cast commercial aluminum alloys can be designed more efficiently on the basis of maintaining a constant rolling load throughout the rolling program. The computation of the final thickness of the strip for every pass can be conducted by means of the simplified theory of Bland and Ford, assuming a constant rolling load during the rolling schedule. Particularly, for twin-roll cast Al-1 percent Mn alloy (TRC 3003) it is possible to reduce one rolling pass if the rolling load is kept constant at about 800 ton. The implementation of this design procedure requires a knowledge of both the work-hardening characteristics of the material and the change in friction conditions throughout the operation. For this last purpose, von Kármán linear differential equation can be integrated following a more efficient computational procedure based on integrating factors and standard numerical integration methods. Also, the work-hardening characteristics of the material were determined from plane strain compression tests, on the basis of the evolution laws proposed by Sah et al. and Follansbee and Kocks. The rolling pass design that has been proposed could have clear advantages in terms of the productivity of the mill, quality of the rolled products and extension of the rolls life.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling Cold-Rolling Processes of Commercial Twin Roll Cast Aluminum Alloys
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1329873
dc.journal.fristpage149
dc.journal.lastpage154
dc.identifier.eissn1528-8889
dc.keywordsFriction
dc.keywordsStress
dc.keywordsDesign
dc.keywordsStrips
dc.keywordsThickness
dc.keywordsWork hardening
dc.keywordsEquations
dc.keywordsDifferential equations
dc.keywordsAluminum alloys
dc.keywordsModeling
dc.keywordsAluminum casting alloys
dc.keywordsPlane strain
dc.keywordsFlow (Dynamics) AND Deformation
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record