Show simple item record

dc.contributor.authorHasan Sofuoglu
dc.contributor.authorJahan Rasty
dc.contributor.authorHasan Gedikli
dc.contributor.authorResearch Assistant
dc.date.accessioned2017-05-09T00:05:02Z
dc.date.available2017-05-09T00:05:02Z
dc.date.copyrightJuly, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27021#338_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125308
dc.description.abstractThe main objective of this research was to investigate the effect of material properties, strain-rate sensitivity, and barreling on the behavior of friction calibration curves. The compression tests were conducted to obtain the necessary material properties for the finite element analysis. A series of ring compression tests were then conducted in order to determine the magnitude of the friction coefficient, μ. The experiments were first conducted for the modeling materials, namely, white and black plasticine and later on, for aluminum, copper, bronze, and brass. The experiments were then simulated via an elastic-plastic finite element code (ABAQUS). Contrary to the results available in the literature, where the same friction calibration curves are recommended for all types of materials and test conditions, the results of this investigation showed that friction calibration curves are indeed affected by the material properties and test conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDetermination of Friction Coefficient by Employing the Ring Compression Test
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1369601
dc.journal.fristpage338
dc.journal.lastpage348
dc.identifier.eissn1528-8889
dc.keywordsFriction
dc.keywordsCalibration
dc.keywordsCompression
dc.keywordsDeformation
dc.keywordsModeling
dc.keywordsFinite element analysis
dc.keywordsMetalworking
dc.keywordsMaterials properties AND Aluminum
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record