Show simple item record

dc.contributor.authorJianmei He
dc.contributor.authorMartin Y. M. Chiang
dc.contributor.authorDonald L. Hunston
dc.date.accessioned2017-05-09T00:05:02Z
dc.date.available2017-05-09T00:05:02Z
dc.date.copyrightJuly, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27021#322_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125305
dc.description.abstractA finite element analysis (FEA) was conducted to examine the feasibility of determining the shear modulus of an adhesive in a bonded geometry using a three-point bending test on a sandwich beam specimen. The FEA results were compared with the predictions from two analytical solutions for the geometry used to determine the impact of the assumptions that were made in these analyses. The analytical results showed significantly different to the values obtained from other experiments on bulk samples of the adhesive in the glassy region. Although there were some agreements in rubbery region, the negligible sensitivity of the beam stiffness to the presence of adhesive layer makes the agreements very questionable. To examine the possible explanations for these differences in glassy adhesives, sensitivity analysis was conducted to explore the effects of experimental variables. Some possible reasons for the differences are discussed, but none of these reasons taken alone satisfactorily account for the discrepancies. Until an explanation is found, the three-point bending test using a sandwich beam specimen to determine the adhesive shear modulus might not be a desirable test method, at least for the range of geometry examined in this study.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAssessment of Sandwich Beam in Three-Point Bending for Measuring Adhesive Shear Modulus
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1375159
dc.journal.fristpage322
dc.journal.lastpage328
dc.identifier.eissn1528-8889
dc.keywordsAdhesives
dc.keywordsFinite element analysis
dc.keywordsShear modulus
dc.keywordsStiffness
dc.keywordsThickness AND Geometry
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record