Show simple item record

dc.contributor.authorY. Shindo
dc.contributor.authorM. Oka
dc.contributor.authorK. Horiguchi
dc.contributor.authorResearch Associate
dc.date.accessioned2017-05-09T00:05:02Z
dc.date.available2017-05-09T00:05:02Z
dc.date.copyrightJuly, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27021#293_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125300
dc.description.abstractTo estimate the electric fracture toughness, indentation fracture (IF) tests were made on piezoelectric materials under combined mechanical and electrical loads. Lead zirconate titanate (PZT) ceramics from a commercial source were used. A three-dimensional finite element analysis was also employed to calculate the energy release rate and stress intensity factor. Surface cracks produced by indentation with Vickers indented were modeled as two point-force loaded half-penny-shaped cracks.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis and Testing of Indentation Fracture Behavior of Piezoelectric Ceramics Under an Electric Field
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1370370
dc.journal.fristpage293
dc.journal.lastpage300
dc.identifier.eissn1528-8889
dc.keywordsForce
dc.keywordsElectric fields
dc.keywordsCeramics
dc.keywordsPiezoelectric ceramics
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsFinite element analysis
dc.keywordsFracture (Process)
dc.keywordsTesting
dc.keywordsFracture toughness
dc.keywordsPiezoelectric materials AND Surface cracks
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record