Show simple item record

dc.contributor.authorTakenobu Takeda
dc.contributor.authorZhongchun Chen
dc.contributor.authorResearch Associate
dc.date.accessioned2017-05-09T00:05:01Z
dc.date.available2017-05-09T00:05:01Z
dc.date.copyrightJuly, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27021#268_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125296
dc.description.abstractIn order to analyze the anisotropic hardening behavior of metals, an off-axis torsion test by combined loading is developed. In this test, the maximum shear stress direction φ can be changed from 0 deg to 90 deg while the ratio of maximum and minimum principal stresses is kept at −1. With increasing angle φ, the yield stress of the torsional-prestrained steel decreases; the difference between the directions of the maximum shear stress and principal shear strain increment rises to a maximum value and then decreases. It is experimentally verified that anisotropy is more severe when a smaller offset strain is used in defining the yield stress.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOff-Axis Torsion Tests on Tubular Specimens of Steel
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1373651
dc.journal.fristpage268
dc.journal.lastpage273
dc.identifier.eissn1528-8889
dc.keywordsMetals
dc.keywordsSteel
dc.keywordsStress
dc.keywordsAnisotropy
dc.keywordsShear (Mechanics)
dc.keywordsTorsion AND Tension
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record