Show simple item record

dc.contributor.authorA. Venkert
dc.contributor.authorP. R. Guduru
dc.contributor.authorG. Ravichandran
dc.contributor.authorMem ASME
dc.date.accessioned2017-05-09T00:05:01Z
dc.date.available2017-05-09T00:05:01Z
dc.date.copyrightJuly, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27021#261_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125295
dc.description.abstractFracture experiments in a high-strength ductile steel (2.3Ni-1.3Cr-0.17C) were conducted under static and dynamic loading conditions in a three-point bend and a one-point bend configurations. A qualitative description of the influence of loading rate on the microscopic features of the fracture surfaces and their role in the fracture initiation process was considered. The fracture surfaces consist of tunneled region and shear lips. The size of the shear lips increases with increasing loading rate and is characterized by micro-voids and cell structures. The tunneled region consists of large voids and micro-voids that coalesce by impingement. At high loading rates, localized molten zones are observed at the tunnel-shear lip interface.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Loading Rate on Fracture Morphology in a High Strength Ductile Steel
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1371231
dc.journal.fristpage261
dc.journal.lastpage267
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsDynamic testing (Materials)
dc.keywordsShear (Mechanics)
dc.keywordsFracture (Process)
dc.keywordsTunnels
dc.keywordsStress AND Fracture (Materials)
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record