Show simple item record

dc.contributor.authorS. Kucharski
dc.contributor.authorZ. Mróz
dc.date.accessioned2017-05-09T00:05:01Z
dc.date.available2017-05-09T00:05:01Z
dc.date.copyrightJuly, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27021#245_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125293
dc.description.abstractThe identification method of hardening parameters specifying stress-strain curve is proposed by applying spherical indentation test and measuring the penetration depth during loading and unloading. The loading program is composed of a geometric sequence of loading and partial unloading steps from which the variation of permanent penetration with load level is determined. This data is used for specification of two parameters k and m occurring in the plastic hardening curve εp=(σ/k)1/m, where εp denotes the plastic strain.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIdentification of Hardening Parameters of Metals From Spherical Indentation Tests
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1375161
dc.journal.fristpage245
dc.journal.lastpage250
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsHardening
dc.keywordsStress-strain curves AND Metals
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record