Show simple item record

dc.contributor.authorH. B. Shim
dc.contributor.authorK. C. Son
dc.date.accessioned2017-05-09T00:05:00Z
dc.date.available2017-05-09T00:05:00Z
dc.date.copyrightOctober, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27024#468_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125283
dc.description.abstractThe sensitivity method is employed in this work in order to find initial blank shapes which result in desired shapes after deformation. By assuming the final deformation shape be the drawn cup with uniform trimming allowance at the flange, the corresponding initial blank which gives the desired final shape after deformation has been found. With the aid of a well-known dynamic explicit analysis code PAM-STAMP, shape sensitivity has been obtained. To get the shape sensitivity numerically, a couple of deformation processes have been analyzed. Drawings of trapezoidal cup, oil pan, and Audi front door panel, the benchmark test problem of Numisheet ’99, have been chosen as the examples. In every case the optimal blank shape has been obtained after only a few modifications without a predetermined deformation path. With the predicted optimal blank, both computer simulation and experiment are performed. Excellent agreements are obtained between simulation and experiment in every case. Through this investigation, the sensitivity method is found to be very effective in the design of arbitrary shaped drawing processes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimal Blank Design for the Drawings of Arbitrary Shapes by the Sensitivity Method
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1398082
dc.journal.fristpage468
dc.journal.lastpage475
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsDesign
dc.keywordsShapes
dc.keywordsBlanks
dc.keywordsEngineering drawings AND Clearances (Engineering)
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record